JobTH.com หาพนักงาน วิศวกรโครงการ, วิศวกรเครื่องกล, อัปเดตทุกวัน

ตำแหน่งที่สนใจ

วิศวกรโครงการ, วิศวกรเครื่องกล

ประวัติการศึกษาสูงสุด

การศึกษา จบการศึกษาแล้ว ในปี พศ. 2562

สถานศึกษา ปริญญาตรี มหาวิทยาลัยเทคโนโลยีราชมงคลศรีวิชัย

วุฒิการศึกษา วิศวกรรมศาสตรบัณฑิต

สาขาวิชา วิศวกรรมเครื่องกล

เกรดเฉลี่ย (GPA.) 3.31

สถานศึกษา มัธยมศึกษาต้น-ปลาย โรงเรียนระโนดวิทยา

วุฒิการศึกษา มัธยม

สาขาวิชา วิทย์-คณิต

เกรดเฉลี่ย (GPA.) 3.34

ประวัติการทำงาน

ประสบการณ์ทำงานทั้งหมด 0 ปี

มกราคม 2567 ถึง พฤษภาคม 2567

ตำแหน่ง Project Engineer & Construction Engineer

บริษัท Tantawan Construction & Service Co.,Ltd

ที่อยู่บริษัท 613/13 หมู่ 2 ถนนสงขลา-จะนะ ตำบลพะวง อำเภอเมืองสงขลา สงขลา 90100

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
: Manage project schedule, supervise, material take-off, logistics arrangement (materials,
manpower, etc.)
: Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.)
: Prepare JSA, Permit-to-work and other related dossiers.
: Lead toolbox meetings prior to starting work.
: Supervise and carry out work site preparation.
: Supervise and carry out piping fabrication, installation, pressure test and pre commissioning
: Supervise and perform other construction work.
: Suggest and make a decision on unexpected problem solutions at site and coordinate.
: Onshore engineering team for technical solution that requires engineering support.
: Prepare work progress reports.
: Ensure that all work is carried out safely in accordance with COMPANY safety procedure.
: Ensure that work quality meets or exceeds COMPANY standard and requirements.
: Prepare project work breakdown scope (WBS for support bidding)
: Prepare project work breakdown scope (WBS for project award)
: Prepare project Team Alignment (Manpower plan)
: Prepare project schedule (EPCIC scope, Master plan)
: Prepare MTO & consumable (Procurement plan)
: Prepare equipment (Equipment plan)
: Prepare project document concern (Project master list)
: Prepare project budget (Budget plan)
: Conduct meeting with project (KOM meeting, pre-work)
: Manage project completed with plan relate safety, quality & environment target
: Control project onshore progress (Project fabrication & onshore progress)
: Control project offshore progress (Project installation & offshore progress)
: Control project cost (Cost control, weekly, monthly, project completed)
: Submit project onshore progress (Project fabrication & onshore report)
: Submit project offshore progress (Project installation & offshore report)
: Submit project cost report (Cost control, weekly, monthly, project completed)
: Prepare document support close out (Final document, T/N, Handover, Completion certificate)
: Conduct meeting with project completed (AAR meeting with sharing lesson learn)
: Prepare document with customer feedback (Customer satisfaction)
: Manage project schedule, supervise, material take-off, logistics arrangement (materials,
manpower, etc.)
: Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.)
: Prepare JSA, Permit-to-work and other related dossiers.
: Lead toolbox meetings prior to starting work.
: Supervise and carry out work site preparation.
: Supervise and carry out piping fabrication, installation, pressure test and pre commissioning
: Supervise and perform other construction work.
: Suggest and make a decision on unexpected problem solutions at site and coordinate.
: Onshore engineering team for technical solution that requires engineering support.
: Prepare work progress reports.
: Ensure that all work is carried out safely in accordance with COMPANY safety procedure.
: Ensure that work quality meets or exceeds COMPANY standard and requirements.
: Prepare project work breakdown scope (WBS for support bidding)
: Prepare project work breakdown scope (WBS for project award)
: Prepare project Team Alignment (Manpower plan)
: Prepare project schedule (EPCIC scope, Master plan)
: Prepare MTO & consumable (Procurement plan)
: Prepare equipment (Equipment plan)
: Prepare project document concern (Project master list)
: Prepare project budget (Budget plan)
: Conduct meeting with project (KOM meeting, pre-work)
: Manage project completed with plan relate safety, quality & environment target
: Control project onshore progress (Project fabrication & onshore progress)
: Control project offshore progress (Project installation & offshore progress)
: Control project cost (Cost control, weekly, monthly, project completed)
: Submit project onshore progress (Project fabrication & onshore report)
: Submit project offshore progress (Project installation & offshore report)
: Submit project cost report (Cost control, weekly, monthly, project completed)
: Prepare document support close out (Final document, T/N, Handover, Completion certificate)
: Conduct meeting with project completed (AAR meeting with sharing lesson learn)
: Prepare document with customer feedback (Customer satisfaction)

ตุลาคม 2563 ถึง ธันวาคม 2566

ตำแหน่ง Project Engineer & Construction Engineer

บริษัท LS engineering and construction co. ltd

ที่อยู่บริษัท HV3+C53 ตำบล ชิงโค อำเภอ สิงหนคร สงขลา 90280

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
: Manage project schedule, supervise, material take-off, logistics arrangement (materials,
manpower, etc.)
: Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.)
: Prepare JSA, Permit-to-work and other related dossiers.
: Lead toolbox meetings prior to starting work.
: Supervise and carry out work site preparation.
: Supervise and carry out piping fabrication, installation, pressure test and pre commissioning
: Supervise and perform other construction work.
: Suggest and make a decision on unexpected problem solutions at site and coordinate.
: Onshore engineering team for technical solution that requires engineering support.
: Prepare work progress reports.
: Ensure that all work is carried out safely in accordance with COMPANY safety procedure.
: Ensure that work quality meets or exceeds COMPANY standard and requirements.
: Prepare project work breakdown scope (WBS for support bidding)
: Prepare project work breakdown scope (WBS for project award)
: Prepare project Team Alignment (Manpower plan)
: Prepare project schedule (EPCIC scope, Master plan)
: Prepare MTO & consumable (Procurement plan)
: Prepare equipment (Equipment plan)
: Prepare project document concern (Project master list)
: Prepare project budget (Budget plan)
: Conduct meeting with project (KOM meeting, pre-work)
: Manage project completed with plan relate safety, quality & environment target
: Control project onshore progress (Project fabrication & onshore progress)
: Control project offshore progress (Project installation & offshore progress)
: Control project cost (Cost control, weekly, monthly, project completed)
: Submit project onshore progress (Project fabrication & onshore report)
: Submit project offshore progress (Project installation & offshore report)
: Submit project cost report (Cost control, weekly, monthly, project completed)
: Prepare document support close out (Final document, T/N, Handover, Completion certificate)
: Conduct meeting with project completed (AAR meeting with sharing lesson learn)
: Prepare document with customer feedback (Customer satisfaction)
: Manage project schedule, supervise, material take-off, logistics arrangement (materials,
manpower, etc.)
: Coordinate with relate parties (COMPANY representatives, supervisors, operation team etc.)
: Prepare JSA, Permit-to-work and other related dossiers.
: Lead toolbox meetings prior to starting work.
: Supervise and carry out work site preparation.
: Supervise and carry out piping fabrication, installation, pressure test and pre commissioning
: Supervise and perform other construction work.
: Suggest and make a decision on unexpected problem solutions at site and coordinate.
: Onshore engineering team for technical solution that requires engineering support.
: Prepare work progress reports.
: Ensure that all work is carried out safely in accordance with COMPANY safety procedure.
: Ensure that work quality meets or exceeds COMPANY standard and requirements.
: Prepare project work breakdown scope (WBS for support bidding)
: Prepare project work breakdown scope (WBS for project award)
: Prepare project Team Alignment (Manpower plan)
: Prepare project schedule (EPCIC scope, Master plan)
: Prepare MTO & consumable (Procurement plan)
: Prepare equipment (Equipment plan)
: Prepare project document concern (Project master list)
: Prepare project budget (Budget plan)
: Conduct meeting with project (KOM meeting, pre-work)
: Manage project completed with plan relate safety, quality & environment target
: Control project onshore progress (Project fabrication & onshore progress)
: Control project offshore progress (Project installation & offshore progress)
: Control project cost (Cost control, weekly, monthly, project completed)
: Submit project onshore progress (Project fabrication & onshore report)
: Submit project offshore progress (Project installation & offshore report)
: Submit project cost report (Cost control, weekly, monthly, project completed)
: Prepare document support close out (Final document, T/N, Handover, Completion certificate)
: Conduct meeting with project completed (AAR meeting with sharing lesson learn)
: Prepare document with customer feedback (Customer satisfaction)

ไม่ได้ระบุ

ตำแหน่ง Project Engineer & Draftsman

บริษัท A V P (THAILAND) COMPANY LIMITED

ที่อยู่บริษัท ถนน สงขลา-จะนะ ตำบลพะวง อำเภอเมืองสงขลา สงขลา 90100

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Researching whether the design material will work and be cost-effective as requirement
specification
: Site survey for scope of works. Clarify scope of works, create drawing and materials take off
: Prepare JSA, Permit to work and other related dossiers.
: Lead toolbox meetings prior to starting work.
: Supervise and carry out work site preparation.
: Suggest and make a decision on unexpected problem solutions at site and coordinate.
: Prepare work progress reports

ประสบการณ์ทำงานอื่นๆ
2018 - 2020 : Food Machinery Co., Ltd.
Position : Project Engineer & Draftsman
Responsibilities : Prepare user requirement specification, Material flow, data flow, process / operation layout,
handing tools
: Equipment, machines, operation, infrastructure, and utilities for new process that best serving
management
: Site survey onsite for layout machine
: Arrange machine layout with 3D software
: Prepare tool and equipment for installation on site
: Prepare and order consumable to support installation on site
: Prepare information for meeting with client
: Lead toolbox meetings prior to starting work
: Supervise and carry out work site preparation
: Meeting daily, weekly, and monthly for update progress with client
: Prepare work progress reports
: Plan the transportation of machines to the site

2017-2018 : Top glove technology (Thailand) co. ltd
Position : Apprentice mechanical engineer
Responsibilities : Assist mechanical engineer
: Prepare daily report
: Supervise and carry out work site preparation

ประวัติการฝึกอบรม

ความสามารถ

ความสามารถทางภาษา

ภาษาไทย
พูด (ดีมาก) อ่าน (ดีมาก) เขียน (พอใช้)

ภาษาอังกฤษ
พูด (ดี) อ่าน (ดี) เขียน (ดี)

พิมพ์ดีด
ไทย 30-50 คำ/นาที อังกฤษ 30-40 คำ/นาที

ความสามารถการขับขี่
รถยนต์ ,

ยานพาหนะส่วนตัว
รถยนต์ ,

ความสามารถพิเศษอื่น ๆ

โครงการ / ผลงาน / เกียรติประวัติ / บุคคลอ้างอิง

โครงการ/ผลงาน
Project Reference

2020 - Present : Onshore (fabrication piping, support, Structural) & Offshore (Installation piping, support and
structural)
: G2S-MOD-23010: 42” Gas Export Pipeline Low Operating Pressure: Thermowell, Transmitter
and Stonewall valve Replacement
: G2S-MOD-22012: To Modify Piping of 2D-5326A/B Inlet and Add Purge Line for 2D-5325A/B
and 2D-5326A/B
: APP: ART-WRK-24001 Anomaly Welding Repair
: ART-WRK-23008 Welding repair corroded stainless pipes Onshore & Offshore
: Notification 2023 G1 Lot#13_Onshore
: Notification 2024 G1 Lot#1_Onshore
: ART-WRK-23008 Welding repair corroded stainless pipes G2_Onshore
: SA-PRO-22003 TRWI Hook Up flow line G1_Onshore & Offshore
: FI-HUC-0031 SGWA Hook Up flow line G1_Onshore & Offshore
: G2N-WRK-22004 Replace defective piping in FSD2023 G2_Onshore & Offshore
: G2N-WRK-22017 LP Fuel gas defective valves and orifice flanges replacement G2_Onshore
& Offshore
: G2N-PRO-21006 WP23 Infill Hook up _Onshore & Offshore
: G2N-WRK-22014 Permanent Repair of 8-OW-50100-B03 in FSD G2_Onshore & Offshore
: G2N-WRK-22008 Partial Replacement of Piping Lines in FSD2023 G2_Onshore & Offshore
: G2N-MOD-22054 Replace-repair pilot gas and flame front line of HP flare at FP G2_Onshore
& Offshore
: G2N-MOD-22005 UPGRADE LOCAL PNEUMATIC CONTROLLER TO DCS CONTROL
G2_Onshore & Offshore
: G2N-MOD-21011 Upgrade GBN Water Injection System Tie-In-FSD G2_Onshore & Offshore
: G2N-MOD-22003 PP Instrument Air Header Replacement G2_Onshore & Offshore
: ART-NOD-22009 ART AT-1-D Injector Well Conversion G2_Onshore & Offshore
: G2N-MOD-22023 WPS17 Hook up flow line G2_Onshore & Offshore
: G2N-PRO-21006 WP23 Infill Hook up flow line G2_Onshore & Offshore
: GBN-MOD-21023 WP10 Infill Hook Up flow line G2_Onshore & Offshore
: G2N-MOD-21007 WP46 Hook Up flow line G2_Onshore & Offshore
: GBN-MOD-21016 WP20 Infill Hook Up flow line G2_Onshore & Offshore
: GBN-MOD-21009-WP13 Infill Hook Up flow line G2_Onshore & Offshore
: G2N-MOD-22023 WP48 Hook Up flow line G2_Onshore & Offshore
: G2N-MOD-21020 Alternative utility air supply line to PP Air compressor G2_Onshore &
Offshore
: G2N-PRO-21007 WP43 Infill Hook up flow line G2_Onshore & Offshore
: GBN-MOD-21006 WP1-F gas to water well conversion line G2_Onshore & Offshore
: ART-WRK-21005-AWP3N Infill Hook Up line flow line G2_Onshore & Offshore
: ART-WRK-21002-AWP9 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21014 -WP2 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21010 -WP6 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21012-WP22 Infill Hook Up line flow line G2_Onshore & Offshore
: ART-WRK-21008 AWP21 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21008 WP31 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21007 WP38 Infill Hook Up line flow line G2_Onshore & Offshore
: G2N-MOD-21007 WP47 Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21015 WP33 Hook Up line flow line G2_Onshore & Offshore
: ART-WRK-21010 AWP39 Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-21011-WP9 Infill Hook Up line flow line G2_Onshore & Offshore
: GBN-MOD-19037 WP29 Infill Hook Up flow line G2_Onshore & Offshore
: GBN-MOD-19036 WP28 Infill Hook Up flow line G2_Onshore & Offshore
: GBN-MOD-19034 WP16 Infill Hook Up flow line G2_Onshore & Offshore
: ART-WRK-20006 AWP38 Hook Up flow line G2_Onshore & Offshore
: ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP30_Onshore &
Offshore_Onshore & Offshore
: ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP31 _Onshore
& Offshore_Onshore & Offshore
: ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP32_Onshore &
Offshore_Onshore & Offshore
: ART-MOD-19014 ART Booster Compressor Exhaust System Modification AWP34_Onshore &
Offshore
: GBN-MOD-19033 WP5 Infill Hook Up flow line G2_Onshore & Offshore
: GBS-MOD-19022 Repairing of corroded heating medium pipe GBS FSD 2020_Onshore &
Offshore
: GBS-MOD-19005 2BDV-39420 full welded butt replacement due to valve can't open in spec
GBS FSD 2020_Onshore & Offshore
: GBS-MOD-19023 Install permanent vent line of Mem Guard Vessels_Onshore & Offshore
: ART-WRK-21003-AWP7 Infill Hook Up flow line G2_Onshore & Offshore
: ART-WRK-21004-AWP1N Infill Hook Up flow line G2_Onshore & Offshore
: GBN-MOD-19030-WP32 Infill Hook Up flow line G2_Onshore & Offshore
: ART-WRK-20006 AWP38 Hook Up_Onshore & Offshore
: GBN-MOD-19034 WP16 Infill Hook Up_Onshore & Offshore
: GBN-MOD-19036 WP28 Infill Hook Up_Onshore & Offshore
: GBN-MOD-19037 WP29 Infill Hook Up_Onshore & Offshore
: THC 21-5388 PROVISION OF WELL HOOK UP CALL-OFF SERVICES CONTRACT FOR
G1/61
: THC 21-5378 Provision of Wellhead Platform Brownfield Modification for G2/61 (Bundle 3
Phase 1B)
: THC 18-5169 Offshore Construction Call-Off
: THC 22-5115 Provision of Offshore Construction Call-out Service
: THC 22-5110 Provision of Offshore Construction Call-out Service.
: THC 21-5259 Provision of Well Hook Up Call-off Services Contract for G2/61
: THC 18-5012 Provision of Well Hook Up services for Bongkot and Arthit fields (Call off
Services)
: Construction Engineer, as Supply Manpower LS Shop
: Call for Tender no. THC20-5145 the Provision of Splash Zone Coating Services for G1/61,
G2/61, G8/50 and
Arthit Asset (Call-Off)
: Fabricate WH support for 4 rigs
: SUPPLY SCAFFOLDING MATERIAL AND MANPOWER (Confined Space)
: Blasting & Painting for Container 10 Units_Onshore
: Fabrication toolbox basket 6 m X 1.5 m x 1.1 m_Onshore
: Fabrication rack nitrogen_Onshore
: Fabrication container 20’
: Fabrication 2 Unit Base Oil Storage Basket_Onshore
: Fabrication project support PTTEP_Onshore
: Fabrication project support Expo_Onshore
: Fabrication project support Halliburton_Onshore
: Fabrication project support MPC KINITIC_Onshore

บุคคลอ้างอิง
สำหรับสมาชิกเท่านั้น