ตำแหน่ง Lead Mechanical Engineer

บริษัท ITALTHAI Engineering Ltd.

ที่อยู่บริษัท REN KORAT ENERGY PROJECT. (Gas Engine by KHI)

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Responsibilities:
- Assist and Support Bidding Cost Estimation and Submit Proposal for Mechanical Scope.
- Prepare/Assist Project Procedure, Risk Register and Project Deliverable Register as per Project Scope.
- Contribute to Establish and Improve Procedures for Standards for Mechanical Work.
- Attend Project Constructability Review and JSA Meeting to Understand Scope of Work to Prepare Project Execution Planning.
- Review Drawing Check with (BOM).
- Balance of Materials on Mechanical Scope, Contact with Purchase for Issue (PO etc.) to Vender.
- Attend Project Meeting and Coordinate with Company Project Team to Ensure.
- Review the Manpower Plan According to the Master Manpower Loading Plan.
- Prepare and Monitoring Daily Report, look a Head and Progress update to Project Manager.
- Review Invoice of Subcontractor and Issue Work Completion
- Review and Control Project Punch List to Track Remaining Work
- Other Job Will be Assigned by Report Line.

ตำแหน่ง Senior Quality Inspector/Quality Inspector.

บริษัท NEUMAN & ESSER South East Asia Ltd.

ที่อยู่บริษัท ิฺBANPEA A. MUENG RAYONG. THAILAND

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Project: JEJU LNG TERMINAL PROJECT (PHASE I).
Project: Hyundai Karbala Refinery Project (Iraq)
Project: S-OIL Residue Upgrading Complex Project. (South Korea).
Responsibilities:
- Standards follow up to API, ASME, AWS, ASTM, SSPC, NACE, ISO9001 ;2015.
- Prepare And monitoring ITP, WI, WPS, PQR, WQT, and Procedure.
- Coordinate with contractors and manage organization.
-To ensure the calibration validation of equipment, tools etc.
- Control and monitoring NCR CAR PAR.
- Monitor and control punch list.
- Inspection all incoming with material received record and material test certificates for the project in compliance with material specification.
- Inspection e.g. Check drawing, project specification, WPS, PQR, physical condition of material free form damaged fit-up tolerance, welder certificated and validity, welding rod and electrode is in WPS.
- Prepare the inspection report all activities for included the MDR.
PIPING & STEEL STRUCTURE
- To ensure the cutting follow ISO drawing.
- Inspection fit-up dimension, center line and hole location.
- Inspection check to installation work (Elevation and plumpness).
- Visual check welding finished. (VT).
- Witness NDT (PT, RT, PMI, PWHT, HT).
- Review summary weld joint and NDT for release note for pressure test.
- Witness hydrostatic test and Pneumatic test follow design requirements.
- Inspection internal cleaning and Flushing before installation.
- To ensure the installation valve and equipment’s.
- Inspection alignment and elevation of pipe.
- Inspection check torque test bolt nut.

MECHANICAL & EQUIPMENT (E&I)
- Inspection check installation Equipment, motor and tubing.
- Inspection leak test of tubing on skid.
- To ensure the alignment of motor and compressor.
- Inspection vibration test with vendor.
- Inspection check torque test, witness lube oil flushing & run test on the skid compressor.
- Witness cooling water system flushing & run test on the skid compressor.

ตำแหน่ง Senior QA/QC Engineer.

บริษัท TRC Construction Public. Co., Ltd.

ที่อยู่บริษัท No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand.

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Apr 2015 – Oct 2016
Position: Senior QA/QC Engineer.
Company: TRC Construction Public. Co., Ltd.
Address: No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand.
Project: TTM (T) New Incinerator Project.
Owner: TRANS THAI-MALAYSIA (THAILAND) LIMITED.
Feb 2014 – Apr 2015
Position: QA/QC Engineer.
Company: TRC Construction Public. Co., Ltd.
Address: No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand.
Project: Navanakorn Rangsit Interconnecting Gas Pipeline Project.
Owner: PTT.
May 2013 – Feb 2014
Position: QA/QC Engineer
Company: TRC Construction Public. Co., Ltd.
Address: No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand
Project: U-THAI Power Plant Gas Pipeline Project.
Owner: Gulf JP/PTT
Responsibilities:
-Monitor and control quality follow inspection and test plan (ITP) and standards NFPA, API
ASME, AWS, ASTM, SSPC, NACE, ISO9001; 2008.
- Prepare And monitoring ITP, WI, WPS, PQR, WQT, and Procedure.
- Coordinate with contractors and manage organization.
-To ensure the calibration validation of equipment, tools etc.
- Inspection all incoming with material received record and material test certificates for the project in compliance with material specification
- Control KPI follow project quality control. And Control NCR PAR CAR.
- Prepare the construction weekly meeting, Prepare the monthly..
- Prepare and review the test package (All Inspection Report).
- Final Inspection P&ID line check Civil, Structure, Piping, Mechanical.
- Prepare the inspection report all activities for included the test package.

STEEL STRUCTURE
- Inspection e.g. Check drawing, project specification, WPS, PQR, physical condition of material free form damaged fit-up tolerance, welder certificated and validity, welding rod and electrode is in WPS.
- Inspection fit-up dimension, center line and hole location.
- Visual check welding finished. (VT), Review the NDT report and film interpreter.
- monitor the temperature, dew point, relative humidity.-Inspection check for surface profile.
- Inspection check for WFT, DFT by used the relevant inspection tools.
- Adhesion Test>>X-cut and Pull of test 1sample for each painting system.
- Final painting inspection and releases note for installation.
-Inspection check to installation work (Elevation and plumpness).
-Inspection check torque test bolt nut.
PIPELINE WORK
- To ensure the WPS, PQR and welder qualify test (WQT).
- Inspection pipe stringing and record.
- Inspection check fit-up tolerance and welding process follow WPS.
- Visual check welding finishing. (VT)
- Witness NDT (PT, MT, UT, PAUT, RT).
- Review the NDT report and film interpreter.
- Review summary weld joint and NDT for release note for pressure test.
- monitor the temperature, dew point, relative humidity.
- Inspection check for surface profile.
- Inspection check for WFT, DFT by used the relevant inspection tools.
- Inspection epoxy and field joint coating.
- Inspection check coating by holiday test tool.
- Inspection & test screw anchor.
- Witness & review Survey data Record.
- To ensure the location of cathodic protection.
- Witness DCVG test.
- Witness hydrostatic test follow design requirements.
- Witness pig Flushing & cleaning for pipeline.
- Witness gauging pig.
- Review report run mapping & GEO pig, GIS record.

CIVIL WORK
- Inspection compaction test (Density).
- Witness & review MIX Design Report.
- Inspection bored pile, pipe deviate.
- Inspection form work and pouring concrete.
-Inspection compressive strength test.
- Foundation survey inspection.
PIPING WORK
- Prepare the WPS, PQR and welder qualify test (WQT).
- Inspection all incoming with material received record and material test certificates for the project in compliance with material specification.
-To ensure the pipe cutting, inspection check fit-up tolerance and welding process follow WPS.
- Visual check welding finishing. (VT)
- Witness NDT (PT, MT, UT, PAUT, RT).
- Review the NDT report and film interpreter.
- Review summary weld joint and NDT for release note for pressure test.
- Witness hydrostatic test and Pneumatic test follow design requirements.
- To monitor the temperature, dew point, relative humidity.
- Inspection check for surface profile.
- Inspection check for WFT, DFT by used the relevant inspection tools.
- Adhesion Test>>X-cut and Pull of test 1sample for each painting system.
- Final painting inspection and releases note for installation.
- Inspection flushing, internal cleaning before installation.
- Inspection alignment and elevation of pipe.
- Inspection installation valve and equipment.
- Inspection check torque test bolt nut.
- Inspection insulation follow project requirement.

MECHANICAL, EQUIPMENT
- Installation check installation Equipment and motor.
- Machinery rotary equipment installation check list.
- Static Equipment installation check list.
- Inspection alignment horizontal or vertical.
- Box up Certificate.
- Pre-Coupling and final Coupling alignment.
- Inspection check torque test bolt nut.
- Inspection check anchor bolt tighten.
- Inspection vibration test with vendor.
- Inspection insulation follow project requirement.
- Inspection rain shield follow project requirement.

REFRACTORY WORK
- Qualification and Installation.
- Inspection test & Lab test.

Sep 2012 – May 2013
Position: Site Engineer.
Company: TRC Construction Public. Co., Ltd.
Address: No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand.
Project: Nong Sang Power Plant Gas Pipeline Project.
Owner: Gulf JP/PTT.

Oct 2011 – May 2012
Position: Site Engineer.
Company: TRC Construction Public. Co., Ltd.
Address: No.8 Soi Sukhaphiban 5 Soi 32 Tha Raeng, Bang Khen District, Bankok 10220, Thailand.
Project: Chieng Rak Noi Power Plant Gas Pipeline Project.
Owner: Gulf JP/PTT.
Responsibilities:
- Make construction plan accordingly to schedule as well distributing daily.
- Control the construction and project progress accordingly to the plan.
- Check and report construction progress of each task in charge.
- Control contractors to keep high standard and quality of construction.
- Control the cost of the construction accordingly to the budget.
- Installation underground pipeline
- Hot-taping from existing gas.
- Installation Metering Regulation Station.

ประสบการณ์ทำงานอื่นๆ
Jan 2024 – Present.
Company: MIT Engineer construction Manpower Ltd.,
Position: Project Engineer.
Project: อาคาร ค.ส.ล. 3 ชั้น.
Project: MAE MOH POWER PLANT UMT4-7 REPIACEMENT PROJECT.
Responsibilities: (Civil, Electrical, Mechanical Work)/ Sanitary and Fire Protection.
- Assist and Support Bidding Cost Estimation and Submit Proposal for Mechanical Scope.
- Prepare/Assist Project Procedure, Risk Register and Project Deliverable Register as per Project Scope.
- Contribute to Establish and Improve Procedures for Standards for Mechanical Work.
- Attend Project Constructability Review and JSA Meeting to Understand Scope of Work to Prepare Project Execution Planning.
- Review Drawing Check with (BOM).
- Balance of Materials on Mechanical Scope, Contact with Purchase for Issue (PO etc.) to Vender.
- Attend Project Meeting and Coordinate with Company Project Team to Ensure.
- Review the Manpower Plan According to the Master Manpower Loading Plan.
- Prepare and Monitoring Daily Report, look a Head and Progress update to Project Manager.
- Review Invoice of Subcontractor and Issue Work Completion
- Review and Control Project Punch List to Track Remaining Work.
- Other Job Will be Assigned by Report Line.
Feb 2021 – Jan 2023.
Company: NW Building and Construction Ltd.
Position: Foreman Inspection.
Responsibilities:
- Make construction plan accordingly to schedule as well distributing daily.
- Control the construction and project progress accordingly to the plan.
- Check and report construction progress of each task in charge.
- Control contractors to keep high standard and quality of construction.
- Control the cost of the construction accordingly to the budget.
Mar 2019 – Feb 2021
Company: GZ AUTO SERVICE & SEQ SOUND EQUALIZER.
Position: N/A.
Responsibilities:
- Maintenance and Service Car and Pick.

สถาบัน (Institut de Soudure Thailand )

หลักสูตร Design and Fabrication of Heat Exchanger ASME VIII.

สถาบัน (PSI Solution Company Limited)

หลักสูตร Project Cost & Quality Management.

สถาบัน (DP Engineering & Training Limited Partnership)

หลักสูตร Certified PT, MT, RT AND UT Level ll In Accordance with ANST Recommended Practice No. SNT-TC-1A Latest Edition.