ตำแหน่ง Field Service Representative (I&C)

บริษัท Dresser-Rand (Siemens)

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
At Sonatrach Refinery Algiers, perform pre-commissioning and commissioning for 12 Reciprocating Compressors including Oil Pumps and Cooling water.
• Instrument and Controls Assistance during Pre-commissioning of Reciprocating Compressors.
• Instrument and Controls Assistance during Commissioning of Reciprocating Compressors.

ตำแหน่ง Contractor Representative (Maintenance Supervisor)

บริษัท SPIE OGS/Saudi Aramco

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
At Saudi Aramco Dhahran Research and Development Center, perform services for 11 pilot plants used for advanced research into production process optimization and clean fuel technology (reduction of Sulfur and other atmospheric pollutants by catalysts and other means).
• Contract management and execution.
• Participate in the Daily Production Meeting and ensure teams compliance with company requirements, budget and safe execution of all work activities. Quality management.
• Management of personnel and services during maintenance and repair work to assure quality and efficiency. Direct coach and support team members. Use of SAP and monitoring status of planned critical maintenance. Also responsible for safety training.
• Attend FAT and SAT.
• Coordinate logistics, E&I maintenance and repairs of equipment to ensure normal operation and maximum availability. Ensure preventive maintenance program assures the normal operation of the equipment and any failure or emergency that may interrupt the normal operations of the Control & Instrument equipment is prevented or corrected
• Assistance and supervision for modification, technical upgrades, installation and commissioning.
• Pressure relief device refurbishment.
• Equipment calibration and verification.
• Act as commissioning authority for new plants, projects and modifications
• Write technical notes, develop and review specifications, perform and check calculations and procurement of new equipment.
• Certified Saudi Aramco Work Permit receiver.

ตำแหน่ง Instrument and Control Commissioning Engineer

บริษัท Amec/ZADCO, Abu Dhabi

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
• Perform Offshore Commissioning for ZADCO Project.
• PMC.

ประสบการณ์ทำงานอื่นๆ
Nov 2013 to Nov 2014: Daelim, South Korea. Sub-lead instrument Engineer (Instrument and Controls)
• Spearheaded System specification, selection, and FEED for Sulfur processing and transportation system.
• Developed FEED for SOHAR refinery expansion project, Oman based on Shell DEPs.
• Planned and coordinated technical design and engineering implementation of all Process Automation Systems and architecture including DCS, SIS, FGS, VMS and HAZOP/SIL Studies, SIL loops evaluation and verification. Also, migration of existing systems.
• Steered technical bid evaluation on suppliers, review and comment on engineering and design documentation. Cooperating and coordinating with clients, sub-contractors and vendors.
• Dealt with the resolution of technical queries.
• Design of Foundation Fieldbus network.
• EPC/EPCM.

July 2012 to Aug 2013: SPIE/Total/Aramco, Saudi Arabia. Process Control System Commissioning Supervisor, Jubail New Refinery
• Process Control Systems Commissioning Supervisor for SATORP PMC liaising and maintaining good relations with vendors and EPCM contractors to achieve safe and efficient plant startup and performance testing.
• Supervised and witnessed all pre-commissioning and commissioning tests and walkdowns including ESD, DCS, Compressor Control, Over Speed Protection, Corrosion Monitoring, F&G, Burner Management (BMS) and all other process control and safeguarding systems. Reviewing and endorsing OTPs, startup procedures, vendor and EPCM contractor documents and drawings for quality and completeness.
• Assisted Project Management to ensure compliance with Company and Project HSE Objectives. Ensured and promoted the use of the Company safety and environment rules.
• Supported operations and other engineering disciplines.
• Validated compliance with ICAPS completion database and OPERCOM methodology for Commissioning and handover. Maintained test logs, cleared punch lists generated and reviewed technical drawings and documentation.
• PMC.

October 2011 to April 2012: Invensys Systems Kazakhstan. Commissioning Manager/ Commissioning Engineer
• Commissioning Engineer for Invensys systems (Triconex and IA), at Agip KCO – Kashagan EP Project (Sour Gas processing).
• Acting Commissioning Manager (Offshore).

April 2010 to July 2011: Chuangdongbei Gas Project, China. Maison Worley Parsons/ Chevron. Senior Process Control Engineer
At Chuangdongbei Gas Project (Sour Gas production, treatment and Sulfur recovery), Roles and responsibilities:
1. Take responsibilities for coordinating all activities surrounding the Fire and Gas and Community alarming system and the main interface Subcontractors. Lead for Electrical, Instrumentation, Fiber, Telecommunications, ESD and PCN for all three phases of the project. Define tasks and identifying priorities for working activities including development of as built documentation, loop diagrams, cable schedule, installation drawings, C&E, FAT testing and SAT testing. Develop corrosion monitoring system.
2. The main focal point and contact for all Electrical, Fire and Gas, Instrumentation, Control, Fiber Optic Network and Telecommunication Engineering Disciplines.
3. Will attend the required meetings for the group.
4. Shall conduct meetings with the group members to discuss work task, issues, work progress and shall document the meeting.
5. Ensure a healthy and positive relationship between the group and all the subcontractors is established and maintained throughout the project to enable effective communication.

June 2009 to March 2010: Foster Wheeler/ Brunei LNG. Commissioning Supervisor (DCS and Control)
• DCS Commissioning Supervisor at Brunei LNG Plant for the Power Plant Phase 1 project part of the Asset Reference Plan intended to extend the life of the Brunei LNG plant beyond 2013.
• Managed DCS and associated equipment installation, planning, scheduling, Management of Change, manpower planning, commissioning and mechanical completion.
• Supervised the construction and ensure implementation of Instrument Scope as per project specifications.
• PMC

Oct 2008 to May 2009: Plexalgroup, Bangkok. Senior I&C Engineer
• Site Surveys, studies and reports for the obsolescence, upgrade and optimization of Chevron Oil and Gas platforms and other production assets in the Gulf of Thailand.
• Produced and presented training courses for Thai personnel regarding many different Oil & Gas/Petrochemical processes related to the upstream and downstream Oil & Gas industries.

July 2008 to Oct 2008: NOV/Silvertech Systems Inc., Houston, TX. Instrument and Control System Engineer - Commissioning
• Design engineering, test and commissioning of BOP subsea control systems.
• FPSO Rang Dong 1.

June 2007 to July 2008: AMEC, Shanghai/PetroChina. DCS and Controls Engineer
• Specified the requirements and design basis for the (Yokogawa) DCS and other Control and Safety Systems for a new refinery delivered to Petro China, in Qinzhou, China.
• Prepared and drove the HAZOP and SIL studies acting as facilitator.
• Produced the new refinery Technical Specifications, Requirements, Standard Operating Procedures (SOPs) and Operating Philosophies (OPs) also supervised the construction of the control and safety Instrumentation systems.
• Mentor/Develop local personnel in the workplace.
• PMC.

Feb 2006 to March 2007: Grenland Framnes, Norway. E&I System Consultant
• Supervised the Electrical & Instrumentation Team on the conversion of the drilling rig Blackford Dolphin (ex. Ocean Liberator) to a deepwater moored drilling and completion rig for worldwide service (ex. Artic and NCS).
• Designed and implemented the BED/FEED for all Fire & Gas systems and associated Instrumentation to NORSOK and DNV standards.
• Project Engineer for the (Yokogawa) PLC, DCS and Safety Instrumented Systems (SIS), IO list preparation.
• Design and Construction. PMC

Jan 2001 to Dec 2005: Silvertech Systems Inc., Houston, TX. Instrument and Control System Engineer - Commissioning
• Leading the Commissioning, Startup and troubleshooting of a wide variety of systems and associated instrumentation both offshore and onshore including Module yard construction/Precommissioning, Sailaway, Commissioning, Start-up and initial operation on FPSO Fluminense in Brazil for Shell/Petrobras.
• Lead all instrumentation and Control activities including documentation, SIL Analysis and participating in HAZOPS reviews.
• Control systems included Allen Bradley PLC 5, 5000 SLC 500 and Control Logix, GE-Fanuc LM-90, WonderWare HMI, Cimplicity and Siemens S5 and S7 working all Asia, Africa and the Americas.
• Time spent working direct for Conoco Indonesia changing the different aspects of the current platform operational process philosophy on an offshore well head platform.

Aug 2000 to Dec 2000: Haven Automation (M) Sdn Bhd., Malaysia. Control System Consultant /Project Engineer
• Wrote the application programs for ESD and STS Systems on the Kerdeh LDPE Project, Malaysia. The software was to IEC1131 part 3 standards and was based on the detailed design performed during the project FEED.

1993 to 2000: Industrial Control Services Inc., Houston TX. Project Engineer, I&C System Commissioning
• Lead Project Engineer for FEED, systems development, FAT and SAT and on site commissioning of all aspects of control system design, Procurement, hardware, software and Instrumentation.
• Systems included Thorn System based safety systems, ICS Fire and Gas, Control and ESD/SIS Systems, Pcim, Panorama, WonderWare, VME and many others including most DCS types such as Honeywell TDC3000, Foxboro AI, Bailey and TCS MaxiVis.
• The projects included multiple systems for Shell Sarawak, LNG trains in Bontang Indonesia, Petrochemical (LDPE and PP) plants in India, China and Egypt, Taiwan, Indonesia and the Middle East.

1985 to 1993: Industrial Control Services plc. Lead Engineer, Project, I&C, System Commissioning
• Instrumentation, Project Engineering, Programming FAT, SAT and Commissioning in the UK and USA.
• On site modification and maintenance of a wide range of products that included IEC 61511 safety related TMR Control Systems design.
• Leading the Project Engineering and FEED on all aspects of control system hardware, Procurement, control Narratives, documentation and software design.
• Design, configuration, integration and implementation of a number of control and safety systems, including Allen Bradley, Modicon, Autronica, Bentley Nevada, all ICS Systems (Control, Fire and Gas and ESD), VME and many others.
• Performed and implemented FEED on Boiler and Burner Management systems for BP, Petrochemical Systems (ICSS) for Shell and a Hydrocracker for BP.